Hi Wim, This is plan for Q3 2012 on the 2960-S but I do not think we have plan to support it on the regular 2960 though. You might want to double-check with your account team for the plan for the regular 2960.
Regards Le 11-12-02 08:02, « Holemans Wim » <[email protected]> a écrit : >Any news if this would come available for the 2960(S) range of switches. >We have about 500 of these and can't afford to replace them all with 3XXX >switches just to get IPv6 protection. > >Wim Holemans >Netwerkdienst Universiteit Antwerpen >Network Services University of Antwerp > > >-----Original Message----- >From: [email protected] >[mailto:[email protected]] On Behalf Of Harold Ritter >Sent: vrijdag 2 december 2011 13:49 >To: Maarten Carels; Cisco Network Service Providers >Subject: Re: [c-nsp] ipv6 nd raguard > >RA Guard, which part of first hop security (FHS) is not currently >available on the 3560. It is targeted for Q1 2012. > > >Le 11-12-02 04:19, « Maarten Carels » <[email protected]> a écrit : > >>Hi list, >> >>I'm trying to protect the ipv6 part of our net by using the RA-Guard >>feature, just line we use dhcp-snooping for ipv4. >> >>Our 6500 switches recognize 'ipv6 nd raguard' without problems. But our >>access switches (we bought a bunch of 3560x switches with LANBase >>software) don't. >> >>I'm wondering if we need IPBase for that. >> >>--maarten >>_______________________________________________ >>cisco-nsp mailing list [email protected] >>https://puck.nether.net/mailman/listinfo/cisco-nsp >>archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > >_______________________________________________ >cisco-nsp mailing list [email protected] >https://puck.nether.net/mailman/listinfo/cisco-nsp >archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
