Do you have the configuration of ASR9K and 7600? Last week, i was configuring the MPLS, MPLS VPN, MPLS TE between the ASR9K and 7600, can work. Show the related configuration, let us troubleshooting together.
Thanks and Regards, Hu Xu 2012/2/25 Ghassan.khalil <[email protected]> > Hi Peter, > Sorry if am making this look I am relaying on the mail group to do the > whole thing for me :) > > Let me rephrase this and finish the argument. I am aware of the document > you mentioned and I have used the document for the 4.0 release during my > pre-implantation and tests on the same environment. > The problem is that an end-to-end l3MPLs was not working between the ASR > and the 7613 router where both are PEs. > I was sure that the 7613 is functioning as I already have customers > connected to it within the MPLS cloud. > That's why I asked about basic MPLS implementation for the ASR9K. > > Anyway I just managed to solve the case as in ASR rd of a vrf is > configured in the bgp body. > When I globally configured a test vrf only an export/import route targets > can be configured. > The vrf needs to he configured again within the bgp and specify the rd. > > Sorry if my questions were generic before. > > Ghassan > > On Feb 24, 2012, at 11:08 PM, Peter Rathlev <[email protected]> wrote: > > > On Fri, 2012-02-24 at 22:54 +0200, Ghassan.khalil wrote: > >> Also Gert if everything was done by google there would be no need for > >> this mail group or for experienced people in deferent domains to share > >> their knowledge. > > > > Yeah, except a thousand questions about how you tie your shoes would > > mean most people able to answer more complex questions got tired and > > went away. :-) > > > > Have you tried searching "cisco.com", a page known to host several > > documents pertaining to configuring Cisco devices? For the fun of it I > > tried searching for "asr 9000 mpls configuration" and literally the > > second hit is: > > > > "Cisco ASR 9000 Series Aggregation Services Router MPLS Configuration > > Guide, Release 3.9" > > > > It's for XR 3.9, but you didn't mention what version you're on. And I'm > > certain it exists for other versions too. As a PDF it's 206 pages, > > walking you through all the basics of MPLS and how to configure your > > ASR9k to use it. > > > > I've never seen or touched an ASR9k, not to mention been logged in to > > one, but it took me about 15 seconds to find this information. I think > > that was Gert's point. > > > > -- > > Peter > > > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
