I am planning to install an ASR9K as a PE router in my network. The ASR will be connected to another 2 PE routers 7613. Can anyone provide me with essential configuration for MPLS on the ASR as I am new to the IOS XR. And I am aiming to apply L3MPLS and VPLS which seems really different than dealing with a 7613 router knowing that the other 2 PEs are running these service pretty fine.
As a first step I need to make sure that the interfaces are MPLS enabled on the ASR and MPBGP neighboring is running. Some might advise to google that :) but i hope I can minimize my searches with your help guys. Regards, Ghassan _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
