Are acl's supported on BVI's ? I have a phy int g0/0/0/1 with a flow point (sub int) g0/0/0/1.10 l2transport config'd and put into l2vpn bg:bd with a routed int inside that bg:bd as bvi 10
I would think that the appropriate location to place an ipv4 access-list would be on the L3 interface , that being the bvi. But I don't see the command "ipv4 access-list" under the bvi. What am I missing here ? Aaron _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
