Dell FTOS has PVST on our Force10 switches. I won't claim familiarity with it or differences to Cisco PVST+ as I don't work in the F10 group, but I know it's there. I can find a Dell F10 contact for you if you have questions about it. Interoperability testing has been done and documented here:
http://i.dell.com/sites/doccontent/shared-content/data-sheets/en/Documents/DELL_Force10_Interoperability_Guide.pdf -Vinny -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Phil Mayers Sent: Tuesday, November 27, 2012 7:34 AM To: Reuben Farrelly Cc: [email protected] Subject: Re: [c-nsp] MST Experiences: was Re: Dell switches (specifically PowerConnect 7048P) and Ciscos On 27/11/12 12:27, Reuben Farrelly wrote: > > What vendors, other than Cisco, support some form of Rapid-PVST? I > believe Arista do on their switches - are there any others? If it's Extreme, Foundry, HP in older firmware (newer firmware dropped it in favour of MST, IIRC - sigh). I think it's pretty widespread, TBH. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
