Randy is correct about FTOS and convergence. The implication of per vlan topology convergence is an engineering matter which has yet to "bubble up" to management here as a concern worth addressing.
It's clearly highly relevant in some environments, but Dell is gaining market share with the STP functioning as-is. While I can bring discussions like this to management attention, the system is set up to listen to the people making sales decisions at customer locations. I'd urge anyone who wants this changed to contact your sales rep. Regards, Bernie On Wed, Nov 28, 2012 at 3:10 PM, Randy <[email protected]> wrote: > my experience with FTOS is pre-Dell so things may have changed since. > > FTOS- RSTP is a *single-instance* of spanning tree for all vlans - > definitely not what I would deploy. > Cisco R-PVST is *per-vlan* and juniper, foundry, extreme do the same. > > FTOS and Cisco PVST work fine > FTOS PVST and Cisco PVST+ work fine: just no benefit of rapid convergence > via uplink-fast or backbone-fast as in PVST+ for indirect link failures. > > I believe the original question was about R-PVST so no, FTOS doesn't do > that as far as I know. > ./Randy > > --- On Wed, 11/28/12, [email protected] <[email protected]> wrote: > > > From: [email protected] <[email protected]> > > Subject: Re: [c-nsp] MST Experiences: was Re: Dell switches > (specifically PowerConnect 7048P) and Ciscos > > To: [email protected], [email protected] > > Cc: [email protected] > > Date: Wednesday, November 28, 2012, 11:36 AM > > Dell FTOS has PVST on our Force10 > > switches. I won't claim familiarity with it or differences > > to Cisco PVST+ as I don't work in the F10 group, but I know > > it's there. I can find a Dell F10 contact for you if you > > have questions about it. Interoperability testing has been > > done and documented here: > > > > > http://i.dell.com/sites/doccontent/shared-content/data-sheets/en/Documents/DELL_Force10_Interoperability_Guide.pdf > > > > -Vinny > > > > -----Original Message----- > > From: [email protected] > > [mailto:[email protected]] > > On Behalf Of Phil Mayers > > Sent: Tuesday, November 27, 2012 7:34 AM > > To: Reuben Farrelly > > Cc: [email protected] > > Subject: Re: [c-nsp] MST Experiences: was Re: Dell switches > > (specifically PowerConnect 7048P) and Ciscos > > > > On 27/11/12 12:27, Reuben Farrelly wrote: > > > > > > > > What vendors, other than Cisco, support some form of > > Rapid-PVST? I > > > believe Arista do on their switches - are there any > > others? If it's > > > > Extreme, Foundry, HP in older firmware (newer firmware > > dropped it in > > favour of MST, IIRC - sigh). I think it's pretty widespread, > > TBH. > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
