On 10/12/2012 19:12, Lobo wrote: > Hi everyone. Been having a hard time trying to get a copper SFP to work on > our ME-3600X-24TS-Ms. According to Cisco documentation, the GLC-T SFP is > supposed to be supported on one of the fiber ports. However every Cisco SFP > we've tried always spits back an error message: > > Switch# > > *Dec 6 19:48:30.448: %PHY-4-SFP_NOT_SUPPORTED: The SFP in Te0/1 is not > supported > > *Dec 6 19:48:30.448: %PM-4-ERR_DISABLE: gbic-invalid error detected on > Te0/1, putting Te0/1 in err-disable state
in theory, these should be supported but I haven't tried them on this platform. Have you tried the following commands: service unsupported-transceiver no errdisable detect cause gbic-invalid errdisable recovery cause gbic-invalid ? It would also be a good idea to talk to your account manager and SE about why this doesn't work. Nick _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
