According to the transceiver matrix, GLC-T is not supported in ASR1k, only the SFP-GE-T. If you meant that, still you might either need "speed 1000" or if that's not supported, it might not work in SFP+ ports which is the case for ME3600X (also confirmed by the matrix pdf). http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6981.pdf
Andras On Tue, Dec 11, 2012 at 3:05 PM, <[email protected]> wrote: > We have the same issue. > Booth on the 3600 and the ASR1001. > From what we gather only some Copper SFPs are working. > GLC-T is a hit miss type of thing. > When using 3rd party SFPs it seems that using ones that dosent support > 10/100/1000 but is fixed at 1000 mbit almost always solves the issue. Could > it be that the 10/100/1000 portion of the GLC-T isnt supported in SFP+ > ports? > > Gustav Uhlander > Communication & Infrastructure Engineer > > Steria AB > Kungsbron 13 > Box 169 > SE-101 23 Stockholm > Sweden > > Tel: +46 8 622 42 15 > Fax: +46 8 622 42 23 > Mobile: +46 70 962 71 03 > [email protected] > www.steria.se > > > [email protected] skrev: ----- > Till: Tóth András <[email protected]> > Från: Lobo ** > Sänt av: [email protected] > Datum: 2012-12-10 21:30 > Kopia: Cisco-nsp <[email protected]> > Ärende: Re: [c-nsp] Copper SFP with ME3600X > > Ahhh interesting. So it looks like the GLC-T is actually NOT supported > on those two SFP ports according to that matrix. > > BTW, this switch's client ports are copper 10/100/1000 RJ-45 so no SFP > is required on them. Looks like this particular model number only > supports the fiber based SFPs. > > Thanks! > > Jose > > On 12/10/2012 2:55 PM, Tóth András wrote: > > GLC-T does not seem to be supported in the SFP+ port, only supported > > in the client ports. > > > http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6981.pdf > > > > If you move the SFP to a client port, does it work? > > > > Andras > > > > > > On Mon, Dec 10, 2012 at 8:44 PM, Lobo <[email protected] > > <mailto:[email protected] <[email protected]>>> wrote: > > > > Normally I would agree with this command but it's not supported. > > The only "speed" command is nonegotiate and it doesn't make a > > difference when plugging the SFP in. > > > > Jose > > > > > > On 12/10/2012 2:40 PM, Tóth András wrote: > >> Given that this is a 1G in a 10G port, you might need to add > >> "speed 1000" to the interface config? > >> > >> Best regards, > >> Andras > >> > >> > >> On Mon, Dec 10, 2012 at 8:12 PM, Lobo <[email protected] > >> <mailto:[email protected] <[email protected]>>> wrote: > >> > >> Hi everyone. Been having a hard time trying to get a copper > >> SFP to work on our ME-3600X-24TS-Ms. According to Cisco > >> documentation, the GLC-T SFP is supposed to be supported on > >> one of the fiber ports. However every Cisco SFP we've tried > >> always spits back an error message: > >> > >> Switch# > >> > >> *Dec 6 19:48:30.448: %PHY-4-SFP_NOT_SUPPORTED: The SFP in > >> Te0/1 is not supported > >> > >> *Dec 6 19:48:30.448: %PM-4-ERR_DISABLE: gbic-invalid error > >> detected on Te0/1, putting Te0/1 in err-disable state > >> > >> Switch# > >> > >> > >> Has anyone had any success with trying to use these on this > >> platform? Fiber based SFPs are fine so long as they're Cisco > >> branded. Are there different versions of GLC-T that we may > >> have the wrong type? > >> > >> Thanks. > >> > >> Jose > >> _______________________________________________ > >> cisco-nsp mailing list [email protected] > >> <mailto:[email protected] <[email protected]>> > > >> https://puck.nether.net/mailman/listinfo/cisco-nsp > >> archive at http://puck.nether.net/pipermail/cisco-nsp/ > >> > >> > > > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > ** > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
