On 2/19/2013 2:57 PM, Jon Lewis wrote:
On Tue, 19 Feb 2013, Eric A Louie wrote:
I've run out of port capacity on my 7206VXR and need to go to "the
next router"
or put in another 7206VXR side-by-side.
Any recommendations on what to use if I were to replace my existing
7206VXR with
another chassis? (it's limited to 5 GB interfaces, and we need 7 or 8)
You've got to say more about what the router is doing and what you
need from it. If it's routing for 8 1gb ethernets and doing full BGP
routes, and nothing special, then a 6500 is an attractive option bang
for your buck-wise. They're made for ethernet and comparitively cheap
to keep adding ports to.
Except when said 6500 sup CPU is asked to do BGP intensive stuff :)
tv
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
