Dear Friends, I am working on IPv6 deployment at our Backbone. Our network design is as below:
PEs --- MP-BGP ---RR ( address-family vpnv4 ) RR------ BGP-----IGW ( address-family ipv4 ) what i understand is : - Add address family IPv6 at PEs : address-family ipv6 neighbor x.x.x.x activate ( x.x.x.x is IPv4 address of RR ) neighbor x.x.x.x send-community both exit-address-family - Add address family IPv6 at RR address-family ipv6 neighbor y.y.y.y send-community both (y.y.y.y is IPv4 address of PE ) neighbor y.y.y.y route-reflector-client neighbor y.y.y.y.y activate - Add address-family vpnv6 ( RR-----IGW ) This is the plan , i dont know if i am missing something. I have Full BGP table IPv4+ IPv6 from my UP LINKS , in order to deploy IPv6 so i need MP-BGP ( RR--- IGW ). We can say MP-BGP ( vpnv4 ) will carry IPv6 packets as a label across IPv4 MPLS Backone. Thanks in advance for sharing info. Regards, Ahmed _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
