Thanks Mikeal, I have seen this dos and it is super useful, but still i need to confirm the plan for you guys !!!
Regards, Ahmed On Fri, Jun 21, 2013 at 2:16 PM, Mikael Abrahamsson <swm...@swm.pp.se>wrote: > On Fri, 21 Jun 2013, Ahmed Hilmy wrote: > > Dear Friends, >> I am working on IPv6 deployment at our Backbone. >> Our network design is as below: >> >> PEs --- MP-BGP ---RR ( address-family vpnv4 ) >> RR------ BGP-----IGW ( address-family ipv4 ) >> >> what i understand is : >> >> - Add address family IPv6 at PEs : >> address-family ipv6 >> neighbor x.x.x.x activate ( x.x.x.x is IPv4 address of RR ) >> neighbor x.x.x.x send-community both >> exit-address-family >> > > Excellent document from cisco on the matter: > > <http://www.cisco.com/en/US/**products/sw/iosswrel/ps1835/**products_data_ > **sheet09186a008052edd3.html<http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_data_sheet09186a008052edd3.html> > > > > You need "send-label". > > -- > Mikael Abrahamsson email: swm...@swm.pp.se > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/