On Fri, 21 Jun 2013, Ahmed Hilmy wrote:
Dear Friends,
I am working on IPv6 deployment at our Backbone.
Our network design is as below:
PEs --- MP-BGP ---RR ( address-family vpnv4 )
RR------ BGP-----IGW ( address-family ipv4 )
what i understand is :
- Add address family IPv6 at PEs :
address-family ipv6
neighbor x.x.x.x activate ( x.x.x.x is IPv4 address of RR )
neighbor x.x.x.x send-community both
exit-address-family
Excellent document from cisco on the matter:
<http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_data_sheet09186a008052edd3.html>
You need "send-label".
--
Mikael Abrahamsson email: [email protected]
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
