On 7/8/2013 8:28 AM, Chris Marget wrote:
On Mon, Jul 8, 2013 at 9:20 AM, Ricardo Stella <[email protected]> wrote:
Ok my math is off and got curious... It would be 6 gig ports.
Yes. So a 48 port blade would require 8 RJ21 connectors, which is not
unprecedented: http://bit.ly/156LDdK
I'm not saying it's not crowded, just that it's better (IMO) than 48
individual cables.
Let me know where you find those Cat6 rated Amphenol cables at. That's
the reason I've heard behind the demise of RJ21 connectors. Having used
a couple 5500s full of them out to patch panels, they were convenient
and easier to swap out a module if you didn't have the tiny fine-pitch
screws get cross threaded when they were put in. Just hope you don't
have to wrestle the bundle of cables out of the way, or you'll feel like
a boa constrictor got loose in the server room.
Jeremy "TheBrez" Bresley
[email protected]
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
