Why not just http://www.amazon.com/gp/aw/d/B002DG18MI ?
But honestly - I would install a patch panel on either end and run proper fixed installation type fibre. Sent from a mobile device > On 15 Oct 2013, at 10:01, Jon Lewis <[email protected]> wrote: > >> On Mon, 14 Oct 2013, Kenny Kant wrote: >> >> I have an older multi-mode fiber connection coming into our 7206VXR / >> NPE-G1 with a SC end. We are moving this fiber to a new router which >> requires a LC/SFP. Due to some other challenges I cannot have this cable >> re-run. Can I get some recommendations for SC to LC conversion? Any web >> links to what you have used in the past one be greatly appreciated. > > SC/LC patch cable and SC/SC coupler. If you have the parts/tools to > terminate your own fiber, you can make your own SC/LC jumper...but it's > cheaper to just order them pre-made. > > http://www.fibercables.com/products/0-2m-0-66ft-multimode-duplex-fiber-optic-cable-62-5-125-lc-to-sc.html > http://www.fibercables.com/products/fiber-optic-adapter-sc-to-sc-multimode-duplex.html > > ---------------------------------------------------------------------- > Jon Lewis, MCP :) | I route > | therefore you are > _________ http://www.lewis.org/~jlewis/pgp for PGP public key_________ > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
