There is a warning on boot up that the router might explode and spread its ashes into space (or similar).
Assuming you have enough ram there is no particular reason why the software wouldn¹t load Kind regards, Sibbi On 20.1.2014 15:52, "Mikael Abrahamsson" <[email protected]> wrote: >On Mon, 20 Jan 2014, Gert Doering wrote: > >> It is still supported? Oh, thanks for that info. I thought NPE400 was >> also EOL already, and end of software support - good to know (and >> end-of-life announcements for the NPE-G1 have been sent). > >Hm, I dug up the EoL announcement, and indeed it's end-of-software >development in sep 2011. However, hardware support is available until Sep >2015. > >Also, they are still releasing images (probably because NPE-G1 runs same >code). 15.2M and 15.2S seems to be the last images made for it. Last >image >available is from september 2013 anyway. > >-- >Mikael Abrahamsson email: [email protected] >_______________________________________________ >cisco-nsp mailing list [email protected] >https://puck.nether.net/mailman/listinfo/cisco-nsp >archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
