We accidently pushed the wrong IOS in this switch. How can we assign IP
address to it in Rommon mode. from switch:
here is what we see this switch on:
File "flash:/c3750e-universalk9-mz.122-53.SE1.bin" uncompressed and
installed, entry point: 0x3000
executing...
Error: hardware not supported by firmware.
Try loading newer software instead.
System Resetting...
Base ethernet MAC Address: 00:1e:bd:10:ef:80
Xmodem file system is available.
The password-recovery mechanism is enabled.
Initializing Flash...
flashfs[0]: 502 files, 7 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 32514048
flashfs[0]: Bytes used: 24845312
flashfs[0]: Bytes available: 7668736
flashfs[0]: flashfs fsck took 22 seconds.
...done Initializing Flash.
Boot Sector Filesystem (bs) installed, fsid: 3
done.
Loading
"c3750e-universalk9-mz.122-53.SE1.bin"...c3750e-universalk9-mz.122-53.SE1.bin:
no such device
Error loading "c3750e-universalk9-mz.122-53.SE1.bin"
Interrupt within 5 seconds to abort boot process.
Loading "flash:/c3750e-universalk9-mz.122-53.SE1.bin".
Please help..
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
