Thank you Rich... I think at this point my only option is Xmodem with 115200 as the 3750G do not have a USB port. Thank you everyone for all your inputs..
Renelson > On Jan 21, 2014, at 11:45 AM, Rich Davies <[email protected]> wrote: > > If you have to push large file over xmodem / console cable and do not want > for it to take a day to transfer you can change the baud rate from default > 9600 to 115200. Just make sure your terminal is set for same baud rate and > you should be able to transfer that file much faster. Also after you are > done and the device is happy change the console speed back to 9600 (for the > next time it's supported via console port.... that next person might not know > you changed it to 115k). > > > Rich > > > >> On Mon, Jan 20, 2014 at 8:50 PM, Panocisco77 <[email protected]> wrote: >> Thank you guys. I was really hoping there is another way because I really >> did not want to do Xmodem. I guest Xmodem it is.. >> >> > On Jan 20, 2014, at 8:33 PM, Blake Dunlap <[email protected]> wrote: >> > >> > Also, in the future I suggest using the archive commands, and not manually >> > loading code. They have protections against this sort of thing. >> > >> > -Blake >> >> On Jan 20, 2014 6:05 PM, "Jeremy Bresley" <[email protected]> wrote: >> >> >> >>> On 1/20/2014 5:58 PM, Renelson Panosky wrote: >> >>> >> >>> We accidently pushed the wrong IOS in this switch. How can we assign IP >> >>> address to it in Rommon mode. from switch: >> >>> >> >>> here is what we see this switch on: >> >>> >> >>> File "flash:/c3750e-universalk9-mz.122-53.SE1.bin" uncompressed and >> >>> installed, entry point: 0x3000 >> >>> >> >>> >> >>> You don't. >> >> >> >> http://www.cisco.com/en/US/products/hw/switches/ps628/products_tech_ >> >> note09186a0080169696.shtml >> >> >> >> Xmodem time... I would suggest setting your console speed to as fast as >> >> possible, and using the oldest image you can find on CCO to get it back >> >> online as the old 12.2(35)SE images tend to be quite a bit smaller than >> >> the >> >> 12.2(55)SE or 15.0(2)SE images. Plan on it taking at least an hour for >> >> the >> >> download. >> >> >> >> Jeremy "TheBrez" Bresley >> >> [email protected] >> >> _______________________________________________ >> >> cisco-nsp mailing list [email protected] >> >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> > _______________________________________________ >> > cisco-nsp mailing list [email protected] >> > https://puck.nether.net/mailman/listinfo/cisco-nsp >> > archive at http://puck.nether.net/pipermail/cisco-nsp/ >> >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
