Also, in the future I suggest using the archive commands, and not manually loading code. They have protections against this sort of thing.
-Blake On Jan 20, 2014 6:05 PM, "Jeremy Bresley" <[email protected]> wrote: > On 1/20/2014 5:58 PM, Renelson Panosky wrote: > >> We accidently pushed the wrong IOS in this switch. How can we assign IP >> address to it in Rommon mode. from switch: >> >> here is what we see this switch on: >> >> File "flash:/c3750e-universalk9-mz.122-53.SE1.bin" uncompressed and >> installed, entry point: 0x3000 >> >> >> You don't. > > http://www.cisco.com/en/US/products/hw/switches/ps628/products_tech_ > note09186a0080169696.shtml > > Xmodem time... I would suggest setting your console speed to as fast as > possible, and using the oldest image you can find on CCO to get it back > online as the old 12.2(35)SE images tend to be quite a bit smaller than the > 12.2(55)SE or 15.0(2)SE images. Plan on it taking at least an hour for the > download. > > Jeremy "TheBrez" Bresley > [email protected] > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
