ok remote-as actually sorry On Fri, Jun 20, 2014 at 11:00 AM, Michael Loftis <[email protected]> wrote: > neigh xxxxxx peer-as yyyy shutdown > > Problem solved. > > On Fri, Jun 20, 2014 at 9:37 AM, Scott Granados <[email protected]> > wrote: >> So this is not a stupid question at all. I’ve wondered about this myself. >> I suspect the reason your terminal slows is the CPU spikes when adding a new >> neighbor and the session establishes. (I could be wrong that’s just a >> guess) In my case I never had the slow down problem so I would cut and >> paste the neighbor with AS and then the neighbor with shut, then apply the >> peer group / description etc and then no shut when the peer is configured. >> XR I believe has a commit command similar to the way Juniper does it. In >> the JunOS case you build out your peer and all he details then commit to >> make the changes live. I worked on a CRS that had a similar setup. I’m >> with you I suspect there’s a better fix for this but I don’t know off hand. >> The cut and paste method is what I always used. >> >> Thanks >> Scott >> >> On Jun 20, 2014, at 10:39 AM, Lukas Tribus <[email protected]> wrote: >> >>> Hey guys, >>> >>> >>> I feel like this is a stupid question with a simple solution, but I just >>> not see it: >>> >>> When I configure a new BGP session, before I can shutdown the neighbor >>> or apply a specific peer-group/session-template/policy-template, I need >>> to configure the remote-as, so the first command in the address-family is: >>> >>> neighbor 2001::123 remote-as 65005 >>> >>> >>> Now, if I don't specify the policies right away, or shutdown the session >>> right away (or the ssh terminal slows down for whatever reason), IOS will >>> establish the BGP session as-is (without any policies), until I manage >>> to configure the rest. >>> >>> In that case, I'm leaking everything I have to the other side for a short >>> period of time, possibly triggering max-prefix limits or causing other >>> nastiness. >>> >>> Especially when using SSH and configuring long IPv6 addresses on IOS-XE >>> here, this seams to be a problem, copy'n'pasting from notepad is not >>> enough in that situation (somehow, the terminal slows down when pasting >>> the config to some 2 - 3 chars per second). >>> >>> >>> Any way to make IOS(-XE) behave in a more sane way so I can configure >>> everything *before* the session brought up? Like defaulting to shutdown >>> or something like that? >>> >>> >>> Let me know how you guys avoid this problem. >>> >>> >>> >>> Thanks! >>> >>> Lukas >>> >>> >>> _______________________________________________ >>> cisco-nsp mailing list [email protected] >>> https://puck.nether.net/mailman/listinfo/cisco-nsp >>> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> >> >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > > -- > > "Genius might be described as a supreme capacity for getting its possessors > into trouble of all kinds." > -- Samuel Butler
-- "Genius might be described as a supreme capacity for getting its possessors into trouble of all kinds." -- Samuel Butler _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
