Hi All, We purchased a refurbished WS-SUP720-3B for our infrastructure, we already had one WS-SUO720-3B in the switch, We plugged it in and it started booting in a loop with these messages:
Aug 16 15:54:08 MDT: %PFREDUN-SP-6-ACTIVE: Standby initializing for SSO mode Aug 16 15:54:09 MDT: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output. Aug 16 15:54:19 MDT: %PFINIT-SP-5-CONFIG_SYNC_NOT_SUPPORTED: Sync'ing the (boot config) configuration to the standby Router is not supported. Aug 16 15:54:20 MDT: %RF-SP-5-RF_RELOAD: Peer reload. Reason: RF Progression failure Aug 16 15:54:20 MDT: %OIR-SP-3-PWRCYCLE: Card in module 6, is being power-cycled 'RF Progression failure' Aug 16 15:54:21 MDT: %PFREDUN-SP-6-ACTIVE: Standby processor removed or reloaded, changing to Simplex mode We then tried the the new sup in a chassis by itself, it works fine and we were passing traffic thru it and it was happy. Has anyone run into this issue before? Thank you for your help! --Tammy _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
