Hi, Try : redundancy config-sync ignore mismatch , then reload the standby
Cdt Kayssar > On Aug 17, 2014, at 4:04, "ext Tammy Firefly" <[email protected]> wrote: > > >> On 8/16/14, 20:53:18, Frank Bulk wrote: >> Looks like you got them all on =) >> >> When you successfully boot the new SUP in a separate chassis is it running >> the exact same software as the production SUP? > > Yup exact same image. > >> >> One other article I read suggested changing the mode to RPR >> (http://www.cisco.com/c/en/us/td/docs/ios/12_2sr/release/notes/122SRcavs2.pd >> f) which means: >> conf t >> redundancy >> mode rpr >> end > Ill give this a try. > > > One thing I did notice is the new sup has a 128MB CF card in a flash > adapter on the sup, the other sup has a 64mb flash module. > Would that cause this? > >> >> Frank > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
