Hi, On Sun, Aug 17, 2014 at 04:46:46PM -0600, Tammy Firefly wrote: > I finally tracked it down, this is what caused it: > boot-start-marker > boot system flash disk0:s72033-advipservicesk9_wan-mz.122-33.SXJ5.bin > boot config bootflash:startup-config > boot-end-marker > > How do I specify which image to load without using that in the startup > configuration?
From what I read in the thread, it's not "boot system" but "boot config"
that is causing you pains.
"boot system" should work fine, provided the slave has a disk0: with that
file on it.
gert
--
USENET is *not* the non-clickable part of WWW!
//www.muc.de/~gert/
Gert Doering - Munich, Germany [email protected]
fax: +49-89-35655025 [email protected]
pgpa8zY0GZxPs.pgp
Description: PGP signature
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
