On 8/16/14, 20:53:18, Frank Bulk wrote: > Looks like you got them all on =) > > When you successfully boot the new SUP in a separate chassis is it running > the exact same software as the production SUP?
Yup exact same image. > > One other article I read suggested changing the mode to RPR > (http://www.cisco.com/c/en/us/td/docs/ios/12_2sr/release/notes/122SRcavs2.pd > f) which means: > conf t > redundancy > mode rpr > end Ill give this a try. One thing I did notice is the new sup has a 128MB CF card in a flash adapter on the sup, the other sup has a 64mb flash module. Would that cause this? > > Frank _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
