In s72033-advipservicesk9_wan-mz.122-33.SXJ5.bin that command doesnt exist.
On 8/17/14, 3:35:31, Ben Hammadi, Kayssar (NSN - TN/Tunis) wrote: > Hi, > > Try : redundancy config-sync ignore mismatch , then reload the standby > > Cdt > Kayssar > >> On Aug 17, 2014, at 4:04, "ext Tammy Firefly" <[email protected]> >> wrote: >> >> >>> On 8/16/14, 20:53:18, Frank Bulk wrote: >>> Looks like you got them all on =) >>> >>> When you successfully boot the new SUP in a separate chassis is it running >>> the exact same software as the production SUP? >> >> Yup exact same image. >> >>> >>> One other article I read suggested changing the mode to RPR >>> (http://www.cisco.com/c/en/us/td/docs/ios/12_2sr/release/notes/122SRcavs2.pd >>> f) which means: >>> conf t >>> redundancy >>> mode rpr >>> end >> Ill give this a try. >> >> >> One thing I did notice is the new sup has a 128MB CF card in a flash >> adapter on the sup, the other sup has a 64mb flash module. >> Would that cause this? >> >>> >>> Frank >> >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > ---------- > > This email has been scanned for spam and viruses by Proofpoint Essentials > cloud email security - visit the following URL to report this email as spam: > https://us1.proofpointessentials.com/index01.php?mod_id&mod_option=logitem&midf689306&rid12411&report=1 > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
