As previously mentioned , hidden IOS command "service unsupported-transceiver"...it is global, not interface level... and for IOS XR I use, interface level, "transceiver permit pid all"
I use non-cisco xcvrs all over the place in my network, they seem fine. Also, ASR901 takes the legacy hidden global command.... I had to use it somewhat recently. Aaron -----Original Message----- From: cisco-nsp [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Jared Mauch Sent: Monday, February 02, 2015 10:31 AM To: Gert Doering Cc: cisco-nsp@puck.nether.net Subject: Re: [c-nsp] Non Cisco SFP > On Feb 2, 2015, at 11:16 AM, Gert Doering <g...@greenie.muc.de> wrote: > > Hi, > > On Mon, Feb 02, 2015 at 03:29:41PM +0000, Rick Martin wrote: >> I am glad to see this thread, we are on the cusp of making the plunge >> into aftermarket optics > > Whatever "aftermarket" optics are - I would not go and by *used* > optics, because that's about the only thing in modern hardware that > truly ages, aka "optics burn out over time". Agreed, general use optics shouldn’t cost you more than $300, and that is being quite generous. If you wanted to program your own optics, apparently you can get one of these new raspberry pis: http://eoinpk.blogspot.com/2014/05/raspberry-pi-and-programming-eeproms-on.html It includes a link at the bottom for how to program the optics to be ‘cisco compatible’. - Jared _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
