On Mon, 2015-11-02 at 08:40 +0530, Methsri Wickramarathna wrote: > I have purchased a fiber link and local ISP requested us to set Class > of Service ( CoS ) value based on the precentage level Voice , Video , > Business Critical & Best effot. Further they have requested us to > follow the IEEE 802.1p standard. > > I have configured the router interface with following configurations > to set the CoS value to 5 of the data packets passing through > interface.
What platform and software? I'm not sure all platforms supports marking on egress. > class-map match-all class-COS > match access-group 100 > ! > policy-map policy_cos > class class-COS > set cos 5 > class class-default > set cos 4 > > interface GigabitEthernet0/2.17 > encapsulation dot1Q 107 > service-policy output policy_cos > end > > Extended IP access list 100 > 10 permit ip any any (616731 matches) The 802.1p bits are carried in the 802.1Q tag, so you would have to mark on the physical interface, not the subinterface. Depending on the platform you might be able to use DSCP marking on the subinterface and the a CoS-to-DSPC map that acts on the physical interface. -- Peter ' _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
