Hi every one, I have purchased a fiber link and local ISP requested us to set Class of Service ( CoS ) value based on the precentage level Voice , Video , Business Critical & Best effot. Further they have requested us to follow the IEEE 802.1p standard.
I have configured the router interface with following configurations to set the CoS value to 5 of the data packets passing through interface. But when I analyzed the traffic ( using Wireshark ) from the destination , I couldn't find relevant fields were confgiured. Appriciate if some one can help me to resolve this issue. *class-map match-all class-COS* * match access-group 100* *!* *policy-map policy_cos* * class class-COS* * set cos 5* * class class-default* * set cos 4* *interface GigabitEthernet0/2.17* * encapsulation dot1Q 107* * service-policy output policy_cos* *end* *Extended IP access list 100* * 10 permit ip any any (616731 matches)* _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
