Yes in performance mode the 'shared' buffer is used for one port only.
The command 'show platform hardware capacity interface' will give you the port buffers.
On 11/27/2015 8:02 AM, selamat pagi wrote:
Hi, Question to oversubscription/performance mode on a C6800-32P10G: I understand that in oversubscription mode 2 ports share port buffers. e.g port 1 and port 9. If port 1 is not used, does port 9 get all the buffers ? or are half of those buffers still allocated to port 1 ? Is there a CLI to check the allocated buffer ? and even usage of buffers for each interface ? cheers, keti http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-6800-series-switches/datasheet-c78-733662.html _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
-- GloboTech Communications Phone: 1-514-907-0050 x 215 Toll Free: 1-(888)-GTCOMM1 Fax: 1-(514)-907-0750 [email protected] http://www.gtcomm.net _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
