Hey Gert, > So, in the end, I used an 1803 with 12.4T on it, which does all I need > there (IPv4 and IPv6 VRF, IPv4 NAT, ISDN!)...
You wanna stick to that release. The 1800 series [180x/181x] halts and catches fire when collecting entropy from the hardware encryption module (>= 15.1(4)M3) on the SPI bus that is shared with the BRI controller and a ISDN call comes in at the "wrong" moment: http://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/Cisco-SA-20140828-CVE-2014-3347 By the time the BU figured this out, the platform was fully EOL'ed, so: "Administrators are advised to downgrade to a version of Cisco IOS Software that does not use hardware entropy collection." Aaahhh, fun times. cheers, Lukas _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
