> Mihai Gabriel
> Sent: Friday, February 12, 2016 2:43 PM
>
> Hi Adam,
>
> I think the community should show up in the local bgp table event without a
> bgp neighbor configured, like the basic communities.
> I have already configured the 'send-community' command but the
> community is not advertised, which is normal because it is not set:)
>
> On Fri, Feb 12, 2016 at 2:27 PM, Adam Vitkovsky
> <[email protected]>
> wrote:
>
Or you could attach a standard community to the prefix and set the desired RT
community based on the standard community on the receiving end.
See RT extcommunity is meant for route information control in VRF environments,
if you don't have VRFs then you are better of using stdcommunity and you can
always convert the stdcommunity to RT extcommunity on ingress to VRF
environment.
adam
Adam Vitkovsky
IP Engineer
T: 0333 006 5936
E: [email protected]
W: www.gamma.co.uk
This is an email from Gamma Telecom Ltd, trading as “Gamma”. The contents of
this email are confidential to the ordinary user of the email address to which
it was addressed. This email is not intended to create any legal relationship.
No one else may place any reliance upon it, or copy or forward all or any of it
in any form (unless otherwise notified). If you receive this email in error,
please accept our apologies, we would be obliged if you would telephone our
postmaster on +44 (0) 808 178 9652 or email [email protected]
Gamma Telecom Limited, a company incorporated in England and Wales, with
limited liability, with registered number 04340834, and whose registered office
is at 5 Fleet Place London EC4M 7RD and whose principal place of business is at
Kings House, Kings Road West, Newbury, Berkshire, RG14 5BY.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
