Hi Adam,
Yes, this is the way to do it, as already Saku told me yesterday:)
Thank you all!
On 02/13/2016 10:15 AM, Adam Vitkovsky wrote:
Hi Mihai,
Mihai Gabriel
Sent: Friday, February 12, 2016 2:43 PM
Hi Adam,
I think the community should show up in the local bgp table event without a
bgp neighbor configured, like the basic communities.
I have already configured the 'send-community' command but the
community is not advertised, which is normal because it is not set:)
Looks like XR supports setting extcommunity on neighbour-out attach point -so
worth trying in vanilla IOS.
So rather than setting the RT while the network is introduced into BGP try
setting the RT while the network is being advertised to the neighbour.
adam
Adam Vitkovsky
IP Engineer
T: 0333 006 5936
E: [email protected]
W: www.gamma.co.uk
This is an email from Gamma Telecom Ltd, trading as “Gamma�. The contents
of this email are confidential to the ordinary user of the email address to
which it was addressed. This email is not intended to create any legal
relationship. No one else may place any reliance upon it, or copy or forward
all or any of it in any form (unless otherwise notified). If you receive this
email in error, please accept our apologies, we would be obliged if you would
telephone our postmaster on +44 (0) 808 178 9652 or email [email protected]
Gamma Telecom Limited, a company incorporated in England and Wales, with
limited liability, with registered number 04340834, and whose registered office
is at 5 Fleet Place London EC4M 7RD and whose principal place of business is at
Kings House, Kings Road West, Newbury, Berkshire, RG14 5BY.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
