Hi,
I am trying to advertise a prefix with an extended route-target community
in the IPv4 default table with no success.
r1#sh route-map test
route-map test, permit, sequence 10
Match clauses:
Set clauses:
extended community RT:65000:65000
Policy routing matches: 0 packets, 0 bytes
r1(config)#
router bgp 65000
no synchronization
bgp log-neighbor-changes
network 10.10.10.10 mask 255.255.255.255 route-map test
r1#sh ip bgp 10.10.10.10
BGP routing table entry for 10.10.10.10/32, version 2
Paths: (1 available, best #1, table default)
Not advertised to any peer
Local
0.0.0.0 from 0.0.0.0 (1.1.1.1)
Origin IGP, metric 0, localpref 100, weight 32768, valid, sourced,
local, best
The IOS version is 15.0(1)M.
Does anyone knows a way to achieve the desired result? On a Juniper MX this
is working as expected.
Thanks
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
