I've tested the following releases for upgrades:
03.16.01a.S/03.16.02a.S/03.17.00.S, all have the same bad behaviour when
upgrading to 03.18.00.S.
I guess the problem really is with 03.18.00.S itself, because it will
also shut down some 10GE ports when
you erase the startup-config starting fresh with a reload, when normally
all ports are no shut by default.
It could have to do with the dual-rate 1G/10G ports, as on the
ASR-920-12CZ-A we didn't have a problem when upgrading.
(they have two 10GE only ports, no 1G SFP work in those ports)
Chris
Am 25.04.16 um 19:56 schrieb Lukas Tribus:
They recently touched the code for CSCux16417, but if that
would be causing the regression, 15.5(3)S2 would be affected
as well.
What's the exact release you are upgrading from, Chris?
Thanks for the heads up, this is very much appreciated.
Lukas
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
