Zolta, The config looks fine to me. Try grabbing "debug ccsip messages" and "debug voice ccapi inout".
Brian From: cisco-voip [mailto:[email protected]] On Behalf Of [email protected] Sent: Thursday, February 06, 2014 1:10 AM To: [email protected] Subject: [cisco-voip] Transcoding on a CME for a CUE Hi, We have a CME (8.6 / IOS 15.1.4M1) with a CUE (8.6.1), a strictly g729 SIP trunk and some DSP resources. I know CUE is g711, so I have set up transcoding, bit calls coming in from the SIP trunk still fail to connect to the voicemail. Transcoding resources show up as ACTIVE and available. I assume they do get registered to local CME. Any ideea, what am I missing? relevant configuration bits: voice-card 0 dspfarm dsp services dspfarm ! ! ! voice service voip allow-connections h323 to h323 allow-connections h323 to sip allow-connections sip to h323 allow-connections sip to sip no supplementary-service h450.2 no supplementary-service h450.3 supplementary-service h450.12 fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none sip bind control source-interface GigabitEthernet0/0 bind media source-interface GigabitEthernet0/0 header-passing registrar server expires max 30000 min 3600 asserted-id pai no update-callerid early-offer forced history-info midcall-signaling passthru g729 annexb-all ! hw-module pvdm 0/0 ! interface SM1/0 ip unnumbered GigabitEthernet0/0 service-module ip address 10.193.35.3 255.255.255.128 !Application: CUE Running on SM service-module ip default-gateway 10.193.35.2 ! mgcp profile default ! sccp local GigabitEthernet0/0 sccp ccm 10.193.35.2 identifier 1 priority 1 version 7.0 sccp ! sccp ccm group 1 associate ccm 1 priority 1 associate profile 2 register xcode01 associate profile 1 register confer1 ! dspfarm profile 2 transcode codec g729r8 codec g729br8 codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 maximum sessions 7 associate application SCCP ! dspfarm profile 1 conference codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 codec g729r8 codec g729br8 maximum sessions 4 associate application SCCP ! dial-peer voice 5110 voip description Voice Mail Pilot destination-pattern 5110 b2bua session protocol sipv2 session target ipv4:10.193.35.3 dtmf-relay sip-notify codec g711ulaw no vad ! dial-peer voice 5111 voip description **AA** destination-pattern 5111 b2bua session protocol sipv2 session target ipv4:10.193.35.3 dtmf-relay sip-notify codec g711ulaw no vad ! dial-peer voice 5112 voip description **Propmt Mgt** destination-pattern 5112 b2bua session protocol sipv2 session target ipv4:10.193.35.3 dtmf-relay sip-notify codec g711ulaw no vad ! dial-peer voice 206 voip description =====MWI on and off incoming called-number 800[0,1].... codec g711ulaw no vad ! dial-peer voice 100 voip description GDS IPT Gateway - International translation-profile incoming inbound-GDS translation-profile outgoing outbound-IPTG preference 1 destination-pattern 9011T session protocol sipv2 session target ipv4:10.193.35.5 incoming called-number +. dtmf-relay rtp-nte h245-alphanumeric supplementary-service pass-through no supplementary-service sip moved-temporarily ! sip-ua retry invite 1 retry bye 3 ! telephony-service sdspfarm conference mute-on 11 mute-off 12 sdspfarm units 4 sdspfarm transcode sessions 7 sdspfarm tag 1 confer1 sdspfarm tag 2 xcode01 no privacy conference hardware ip source-address 10.193.35.2 port 2000 voicemail 5110 max-conferences 8 gain -6 call-park system application dn-webedit time-webedit transfer-system full-consult transfer-pattern 9.T secondary-dialtone 9 fac standard create cnf-files version-stamp 7960 Jul 09 2013 12:16:35 ! Zoltan Kelemen Global Communications and Information Security Implementation Engineering Emerson
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
