I do not see a codec specified on your inbound SIP dial-peer. Try setting the codec to what you want it to be or setting a voice class codec line with the preferred codecs listed.
James Buchanan | Sr. Network Engineer Presidio | www.presidio.com 12 Cadillac Drive Suite 130, Brentwood, TN 37027 D: 615.866.5729 | C: 931.797.2326 | F: 615.866.5781 | [email protected] PRESIDIO Practical thinking for a connected world. Follow Us: www.twitter.com/presidio ________________________________________ From: cisco-voip [[email protected]] on behalf of [email protected] [[email protected]] Sent: Thursday, February 06, 2014 12:09 AM To: [email protected] Subject: [cisco-voip] Transcoding on a CME for a CUE Hi, We have a CME (8.6 / IOS 15.1.4M1) with a CUE (8.6.1), a strictly g729 SIP trunk and some DSP resources. I know CUE is g711, so I have set up transcoding, bit calls coming in from the SIP trunk still fail to connect to the voicemail. Transcoding resources show up as ACTIVE and available. I assume they do get registered to local CME. Any ideea, what am I missing? relevant configuration bits: voice-card 0 dspfarm dsp services dspfarm ! ! ! voice service voip allow-connections h323 to h323 allow-connections h323 to sip allow-connections sip to h323 allow-connections sip to sip no supplementary-service h450.2 no supplementary-service h450.3 supplementary-service h450.12 fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none sip bind control source-interface GigabitEthernet0/0 bind media source-interface GigabitEthernet0/0 header-passing registrar server expires max 30000 min 3600 asserted-id pai no update-callerid early-offer forced history-info midcall-signaling passthru g729 annexb-all ! hw-module pvdm 0/0 ! interface SM1/0 ip unnumbered GigabitEthernet0/0 service-module ip address 10.193.35.3 255.255.255.128 !Application: CUE Running on SM service-module ip default-gateway 10.193.35.2 ! mgcp profile default ! sccp local GigabitEthernet0/0 sccp ccm 10.193.35.2 identifier 1 priority 1 version 7.0 sccp ! sccp ccm group 1 associate ccm 1 priority 1 associate profile 2 register xcode01 associate profile 1 register confer1 ! dspfarm profile 2 transcode codec g729r8 codec g729br8 codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 maximum sessions 7 associate application SCCP ! dspfarm profile 1 conference codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 codec g729r8 codec g729br8 maximum sessions 4 associate application SCCP ! dial-peer voice 5110 voip description Voice Mail Pilot destination-pattern 5110 b2bua session protocol sipv2 session target ipv4:10.193.35.3 dtmf-relay sip-notify codec g711ulaw no vad ! dial-peer voice 5111 voip description **AA** destination-pattern 5111 b2bua session protocol sipv2 session target ipv4:10.193.35.3 dtmf-relay sip-notify codec g711ulaw no vad ! dial-peer voice 5112 voip description **Propmt Mgt** destination-pattern 5112 b2bua session protocol sipv2 session target ipv4:10.193.35.3 dtmf-relay sip-notify codec g711ulaw no vad ! dial-peer voice 206 voip description =====MWI on and off incoming called-number 800[0,1].... codec g711ulaw no vad ! dial-peer voice 100 voip description GDS IPT Gateway - International translation-profile incoming inbound-GDS translation-profile outgoing outbound-IPTG preference 1 destination-pattern 9011T session protocol sipv2 session target ipv4:10.193.35.5 incoming called-number +. dtmf-relay rtp-nte h245-alphanumeric supplementary-service pass-through no supplementary-service sip moved-temporarily ! sip-ua retry invite 1 retry bye 3 ! telephony-service sdspfarm conference mute-on 11 mute-off 12 sdspfarm units 4 sdspfarm transcode sessions 7 sdspfarm tag 1 confer1 sdspfarm tag 2 xcode01 no privacy conference hardware ip source-address 10.193.35.2 port 2000 voicemail 5110 max-conferences 8 gain -6 call-park system application dn-webedit time-webedit transfer-system full-consult transfer-pattern 9.T secondary-dialtone 9 fac standard create cnf-files version-stamp 7960 Jul 09 2013 12:16:35 ! Zoltan Kelemen Global Communications and Information Security Implementation Engineering Emerson This message w/attachments (message) is intended solely for the use of the intended recipient(s) and may contain information that is privileged, confidential or proprietary. If you are not an intended recipient, please notify the sender, and then please delete and destroy all copies and attachments. Please be advised that any review or dissemination of, or the taking of any action in reliance on, the information contained in or attached to this message is prohibited. _______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
