There is on NTP server and it is accessible. Everything passed on the utils diagnose test thing... (didn't run the modules that needed to be run directly)
Jonathan On Tue, Mar 10, 2015 at 6:57 AM, Kevin Przybylowski <[email protected]> wrote: > Check your NTP server’s status ‘utils ntp status’ – if any are > inaccessible, remove them. Also ‘utils diagnose test’ is good to run as > well. > > > > > > > > *From:* cisco-voip [mailto:[email protected]] *On Behalf > Of *Jonathan Charles > *Sent:* Tuesday, March 10, 2015 1:06 AM > *To:* Andrew Grech > *Cc:* Cisco VoIP Group > *Subject:* Re: [cisco-voip] Upgrade 9.1.2 to 10.0 fails... > > > > Well, that didn't work... SFTP'd the ISO to the box, same error... > > > > Same error message... > > > > > > > > Jonathan > > > > On Mon, Mar 9, 2015 at 11:45 PM, Jonathan Charles <[email protected]> > wrote: > > It is re-running after SFTPing from a Windows box (FreeFTPd)... > > > > > > Jonathan > > > > On Mon, Mar 9, 2015 at 11:31 PM, Andrew Grech <[email protected]> wrote: > > Hi john, I've had a ISO from Linux to prime with bad permissions and had > this error > > On 10/03/2015 1:13 PM, "Jonathan Charles" <[email protected]> wrote: > > OK, let me try via SFTP (Windows box)... see what happens... > > > > > > Jonathan > > > > On Mon, Mar 9, 2015 at 9:26 PM, Charles Goldsmith <[email protected]> > wrote: > > Given that it is complaining about accessing the upgrade file, are you > using dvd image/dvd on the host or sftp? I'd try a different method to see. > > > > Not a whole lot of information, but I have seen SFTP cause similar issues, > I think it was a permissions problem on a linux setup using openssh. > > > > On Mon, Mar 9, 2015 at 8:16 PM, Jonathan Charles <[email protected]> > wrote: > > Getting error: > > > > > > Error encountered: An unknown error occurred while accessing the upgrade > file. Warning: A system reboot is required when the upgrade process > completes or is canceled. This will ensure services affected by the upgrade > process are functioning properly. > > > > Tried upgrade from to 10.0.1 and 10.5.1, same errors... > > > > I have applied the ciscocm.version3-keys.cop.sgn patch, no change in > behavior... > > > > > > Any ideas? > > > > > > > > Jonathan > > > > _______________________________________________ > cisco-voip mailing list > [email protected] > https://puck.nether.net/mailman/listinfo/cisco-voip > > > > > > > _______________________________________________ > cisco-voip mailing list > [email protected] > https://puck.nether.net/mailman/listinfo/cisco-voip > > > > >
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
