I applied the RSA cop file... the version from is 9.1.2.11900-12 I have tried going to:
10.0.1.11900-2 10.5.1.10000-7 Same errors every time. All of them are the non-bootable ISO. Jonathan On Tue, Mar 10, 2015 at 6:22 AM, Ryan Huff <[email protected]> wrote: > Jonathan, > > Have you applied any other cop or engineering special files besides the > version 3 keys? > > Is your cluster based on the unrestricted export version or the restricted > export version? Does the update your applying match (restricted versus > unrestricted) > > Can you list out the specific version of 10.0.1 you are using and the > specific version version of 10.5.1 that you want to go to? > > If you do a "show version active" on all the cluster nodes; what do you > see? Is it the same on all nodes? > > I assume you tried to download a new image file from CCO and use that? > > Thanks, > > Ryan > > > -------- Original Message -------- > From: Jonathan Charles <[email protected]> > Sent: Tuesday, March 10, 2015 01:30 AM > To: Andrew Grech <[email protected]> > Subject: Re: [cisco-voip] Upgrade 9.1.2 to 10.0 fails... > CC: Cisco VoIP Group <[email protected]> > > Well, that didn't work... SFTP'd the ISO to the box, same error... > > Same error message... > > > > Jonathan > > On Mon, Mar 9, 2015 at 11:45 PM, Jonathan Charles <[email protected]> > wrote: > >> It is re-running after SFTPing from a Windows box (FreeFTPd)... >> >> >> Jonathan >> >> On Mon, Mar 9, 2015 at 11:31 PM, Andrew Grech <[email protected]> wrote: >> >>> Hi john, I've had a ISO from Linux to prime with bad permissions and had >>> this error >>> On 10/03/2015 1:13 PM, "Jonathan Charles" <[email protected]> wrote: >>> >>>> OK, let me try via SFTP (Windows box)... see what happens... >>>> >>>> >>>> Jonathan >>>> >>>> On Mon, Mar 9, 2015 at 9:26 PM, Charles Goldsmith <[email protected] >>>> > wrote: >>>> >>>>> Given that it is complaining about accessing the upgrade file, are you >>>>> using dvd image/dvd on the host or sftp? I'd try a different method to >>>>> see. >>>>> >>>>> Not a whole lot of information, but I have seen SFTP cause similar >>>>> issues, I think it was a permissions problem on a linux setup using >>>>> openssh. >>>>> >>>>> On Mon, Mar 9, 2015 at 8:16 PM, Jonathan Charles <[email protected]> >>>>> wrote: >>>>> >>>>>> Getting error: >>>>>> >>>>>> >>>>>> Error encountered: An unknown error occurred while accessing the >>>>>> upgrade file. Warning: A system reboot is required when the upgrade >>>>>> process >>>>>> completes or is canceled. This will ensure services affected by the >>>>>> upgrade >>>>>> process are functioning properly. >>>>>> >>>>>> Tried upgrade from to 10.0.1 and 10.5.1, same errors... >>>>>> >>>>>> I have applied the ciscocm.version3-keys.cop.sgn patch, no change in >>>>>> behavior... >>>>>> >>>>>> >>>>>> Any ideas? >>>>>> >>>>>> >>>>>> >>>>>> Jonathan >>>>>> >>>>>> _______________________________________________ >>>>>> cisco-voip mailing list >>>>>> [email protected] >>>>>> https://puck.nether.net/mailman/listinfo/cisco-voip >>>>>> >>>>>> >>>>> >>>> >>>> _______________________________________________ >>>> cisco-voip mailing list >>>> [email protected] >>>> https://puck.nether.net/mailman/listinfo/cisco-voip >>>> >>>> >> >
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
