Ed-- (Troy too) Thanks for posting the fix. That was perfect for our upgrade too!!
Scott On Fri, May 1, 2015 at 12:48 PM, Countryman, Edward < edward.country...@presencehealth.org> wrote: > This turned out to be a setting in Rightfax. Now working again! > > Many thanks to Troy Putnam for emailing me the fix outlined below: > > > In RightFax: > Log into the Brooktrout Configuration tool > --> IP Call Control Modules > --> SIP > --> T.38 Parameters, and change the Media Renegotiate Delay Outbound, > msec: from -1 top 500. > > > > > -----Original Message----- > From: Charles Goldsmith [mailto:wo...@justfamily.org] > Sent: Thursday, April 30, 2015 5:36 PM > To: Haas, Neal > Cc: Countryman, Edward; Cisco VOIP > Subject: Re: [cisco-voip] CUCM 10.5 and OpenText 10.6 > > There are no timers in the SIP trunk, but the SIP Profile has several. > > Please let us know which timer you find that resolves this? I have a > customer that will be going to 10.5 soon and are using RightFax. > > Also, RightFax has some good documentation and support, they may have this > already covered. > > On Thu, Apr 30, 2015 at 4:33 PM, Haas, Neal <nh...@co.fresno.ca.us> wrote: > > We had the same thing with our Accuroute Fax server. We called TAC and > > it was the time out on the SIP trunk needed to be increased. As soon > > as we called in the TAC person had us fixed up in minutes. > > > > > > > > I don’t know the exact thing that had to be changed; the guy that did > > the work is out this week. > > > > > > > > If you have 79XX phones, update the COP file for your phones, > > transfers while on a call with a head set are broken. Calls will just > > drop with a transfer…… > > > > > > > > > > > > Neal Haas > > > > > > > > From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf > > Of Countryman, Edward > > Sent: Thursday, April 30, 2015 3:06 PM > > To: Cisco VOIP > > Subject: [cisco-voip] CUCM 10.5 and OpenText 10.6 > > > > > > > > We have had right fax 10.5 up and running with a SIP trunk from our > > CUCM > > 8.6.2 environment for a while now. > > > > > > > > This past weekend we updated to CUCM 10.5.2 and are no longer able to > > fax out from RF. > > > > > > > > From the trace, the SIP call appears to fail with the following error > > after the INVITE > > > > > > > > 488 Not Acceptable Here > > > > > > > > Do would anything have changed in 10.5 to possibly be causing this? > Weird > > thing is the inbound faxes are working fine. > > > > > > _______________________________________________ > > cisco-voip mailing list > > cisco-voip@puck.nether.net > > https://puck.nether.net/mailman/listinfo/cisco-voip > > > _______________________________________________ > cisco-voip mailing list > cisco-voip@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-voip >
_______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip