Hi Lisa,
There is a company based in India that I have used in the past that I believe have a product that meets your requirements. http://www.parsec-tech.com/ProjectDocs/MARS%20Panic%20Button.pdf I haven’t used this specific product before but used another (silent monitoring) and was very impressed with the product and service. Cheers Nick CCIE Collaboration #54108 On Mon, Jan 30, 2017 at 2:54 PM, Ryan Huff <[email protected]> wrote: > While this still in allows for 2-way communication; an interim solution > until the Informacast server is available again (that is your best option) > is to have the far end phone auto answer on speaker and do a local side > route pattern with a unique steering digit. > > Outside of that and assuming you have network devices that could do it, > you could on purpose, break the far end RTP network path; this would take > some engineering to isolate it to one phone still allow the call setup > (SIP) (would have to disable VAD / Silence suppression in CCM too which has > its own implications) and honestly, would it be worth the investment in > time and effort? > > How long until the upgrade on InformaCast Vs. how bad does it need done in > totality now, or can you implement a 'sort of complete' solution like just > having the far-end auto answer? > > Sent from my iPhone > > On Jan 30, 2017, at 4:36 PM, Ben Amick <[email protected]> wrote: > > Issue with intercom is it is strictly a 1:1 relationship, and would > require a seemingly infinite number of sidecars on the campus police, as it > requires the intercom button on both devices., at least in my experience. > It also doesn’t establish a conversation, so you have no idea if anyone is > actually listening on the other end. > > > > *Ben Amick* > > Telecom Analyst > > > > *From:* cisco-voip [mailto:[email protected] > <[email protected]>] *On Behalf Of *Lelio Fulgenzi > *Sent:* Monday, January 30, 2017 4:33 PM > *To:* [email protected] > *Subject:* Re: [cisco-voip] Panic Button Solution? > > > > > > How about Intercom? From what I remember (and read below) it's a feature > which automatically connects the caller to the recipient in whisper mode so > that the called party hears everything but can't actually talk back until > they initiate so. No ringing, auto-answer. I'm not sure if there is a > one-to-one or one-to-many relationship and how that would work at the end > unit. But that being said, that would be a problem with any solution. > Multiple locations sending panic calls to one destination (campus police). > > > > If it were me, I'd investigate intercoms. > > > > http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/ > admin/10_0_1/ccmfeat/CUCM_BK_F3AC1C0F_00_cucm-features- > services-guide-100/CUCM_BK_F3AC1C0F_00_cucm-features- > services-guide-100_chapter_0100011.html > > > <http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmfeat/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100_chapter_0100011.html> > > Features and Services Guide for Cisco Unified ... > <http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmfeat/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100_chapter_0100011.html> > > www.cisco.com > > Features and Services Guide for Cisco Unified Communications Manager, > Release 10.0(1) -Intercom > > > > > > --- > > Lelio Fulgenzi, B.A. > > Senior Analyst, Network Infrastructure > > Computing and Communications Services (CCS) > > University of Guelph > > > > 519-824-4120 Ext 56354 <(519)%20824-4120> > > [email protected] > > www.uoguelph.ca/ccs > > Room 037, Animal Science and Nutrition Building > > Guelph, Ontario, N1G 2W1 > > > ------------------------------ > > *From:* cisco-voip <[email protected]> on behalf of Lisa > Notarianni <[email protected]> > *Sent:* Monday, January 30, 2017 4:18 PM > *To:* [email protected] > *Subject:* [cisco-voip] Panic Button Solution? > > > > Call Manager 10.5.2.12901-1 > > > > I have a request from a department here at The University of Scranton to > use a button on their phone as a panic button that would do the following: > > 1. Automatically dial our Police department without a ring tone > > 2. Provide one way communication to University Police so they can > listen to the conversation to get an idea of the issue and then dispatch an > officer > > It is important to have silence on the phone connection when the button is > pressed > > I looked into PLAR but I don’t think it can be configured exactly this > way. We have a SingleWire server but it is in the process of being > upgraded. So, before we install a physical panic button without a voice > feature, we wondered if there were any other creative solutions. > > Thank you in advance - > > Lisa Notarianni > > [image: Lisa Notarianni Telecom Engineer] > > > > > > Confidentiality Note: This message is intended for use only by the > individual or entity to which it is addressed and may contain information > that is privileged, confidential, and exempt from disclosure under > applicable law. If the reader of this message is not the intended recipient > or the employee or agent responsible for delivering the message to the > intended recipient, you are hereby notified that any dissemination, > distribution or copying of this communication is strictly prohibited. If > you have received this communication in error, please contact the sender > immediately and destroy the material in its entirety, whether electronic or > hard copy. Thank you > > _______________________________________________ > cisco-voip mailing list > [email protected] > https://puck.nether.net/mailman/listinfo/cisco-voip > > > _______________________________________________ > cisco-voip mailing list > [email protected] > https://puck.nether.net/mailman/listinfo/cisco-voip > > -- - Nick
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
