The CP-BEKEM or the newer one? I’m speculating based on the way the newer one is listed as a video expansion module in some places you need the newer one..
Matthew Loraditch Sr. Network Engineer p: 443.541.1518 w: www.heliontechnologies.com | e: [email protected] From: cisco-voip <[email protected]> On Behalf Of Anthony Holloway Sent: Friday, August 10, 2018 12:13 PM To: Cisco VoIP Group <[email protected]> Subject: [cisco-voip] 8865 + KEM + Video Calls I have a use case on an 8865 with the KEM, and a Line configured per the usual setup. If that line is on the phone itself, I can call it, and get video to establish. If I move the line to the KEM, I can call it, but get audio only. Is that working as designed, a configuration miss on my part, or a defect? Unfortunately, I don't have access to many expansion modules (none actually), so testing different setups/firmware versions is not possible. Thanks in advanced.
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
