I'm not sure I have conclusive evidence on this one, but the remote person troubleshooting this issue, stated that the require MTP check box was enabled for the phone, and that once unchecked, the calling scenario worked. Unfortunately, I'm not going to be able to grabs logs for this, and it's one of those cases where we'll never know precisely, but that's what I have. My thanks goes out to the folks who responded, and a special thanks to Jeremy for hitting me up in Webex Teams and conducting some testing on his end.
On Fri, Aug 10, 2018 at 3:59 PM Anthony Holloway < [email protected]> wrote: > As far as you know Jeremy, is the "Video" in the name of the KEM for the > 8865, just a description, and not necessarily a capability? I cannot > imagine why the KEM would have caps, but you never know. > > On Fri, Aug 10, 2018 at 1:55 PM Jeremy Bresley <[email protected]> wrote: > >> To clarify, there's actually 3 different 8800 KEMs. >> The original (CP-BEKEM=) is the single screen straight model. >> The 8851/8861 KEM (CP8800-A-KEM=) is the dual-screen straight model. >> The 8865 KEM (CP-8800-V-KEM=) is the dual-screen tilted model (matching >> the bend in the 8845/65). >> >> The A-KEM and V-KEM do require newer phone loads to be supported. The >> BEKEM is supported on older firmware than you want to be using in >> production anymore. >> >> Jeremy >> On 8/10/18 14:46, Matthew Loraditch wrote: >> >> I have a feeling that’s for the new model. The BEKEM model existed long >> before 12.x did but you never know! >> >> >> >> Matthew Loraditch >> Sr. Network Engineer >> p: *443.541.1518* <443.541.1518> >> w: *www.heliontechnologies.com* <http://www.heliontechnologies.com/> | >> e: *[email protected]* >> <[email protected]> >> [image: Facebook] <https://facebook.com/heliontech> >> [image: Twitter] <https://twitter.com/heliontech> >> [image: LinkedIn] <https://www.linkedin.com/company/helion-technologies> >> [image: Helion joins Automotive CX Summit] >> <https://heliontechnologies.com/events/14th-annual-automotive-cx-summit-hosted-thought-leadership-summits/> >> *From:* Anthony Holloway <[email protected]> >> <[email protected]> >> *Sent:* Friday, August 10, 2018 2:45 PM >> *To:* Matthew Loraditch <[email protected]> >> <[email protected]> >> *Cc:* Cisco VoIP Group <[email protected]> >> <[email protected]> >> *Subject:* Re: [cisco-voip] 8865 + KEM + Video Calls >> >> >> >> I just noticed that there is a requirement in the accessories guide to be >> running 12.0(1) firmware when using the KEM. >> >> >> >> "The Cisco IP Phone 8851/8861 Key Expansion Module and the Cisco IP Phone >> 8865 Key Expansion Module require firmware release 12.0(1) or later, and >> Cisco Unified Communications Manager 10.5(2) or later to function." >> >> Source: >> https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/7800-8800/english/accessories/p881_b_accessorie-guide-for-cisco-ip/p881_b_accessorie-guide-for-cisco-ip_chapter_01.html#IP8K_TP_CA5D75A4_00 >> >> >> >> And this phone is running 11.7(1). Let me get that upgraded quick and >> re-test. >> >> >> >> On Fri, Aug 10, 2018 at 1:40 PM Anthony Holloway < >> [email protected]> wrote: >> >> The module is the single LCD flat one, not the dual screen angled one. >> The module in CUCM is listed as "BEKEM 36-Button Line Expansion Module" as >> opposed to "CP-8800-Video 28 Button Key Expansion Module" or even >> "CP-8800-Audio 28 Button Key Expansion Module" >> >> >> >> Interestingly, I have both an 11.5(1)SU3 and an 11.5(1)SU4 deployment to >> look at, and the SU3 one doesn't have the newer KEM selections in the drop >> down, but the SU4 one does. So, you would think that the SU4 Release Notes >> would mention it, but there's nothing in there. >> >> >> >> I'd be surprised if the module itself is causing the phone to negotiate >> video or not, but I suppose Cisco does like to keep us on our toes. >> >> >> >> >> >> On Fri, Aug 10, 2018 at 11:30 AM Matthew Loraditch < >> [email protected]> wrote: >> >> The CP-BEKEM or the newer one? I’m speculating based on the way the newer >> one is listed as a video expansion module in some places you need the newer >> one.. >> >> >> >> >> >> *Matthew Loraditch*** >> >> *Sr. Network Engineer* >> >> p: *443.541.1518* <443.541.1518> >> >> w: *www.heliontechnologies.com* <http://www.heliontechnologies.com/> >> >> | >> >> e: *[email protected]* >> <[email protected]> >> >> >> <https://facebook.com/heliontech> >> >> <https://facebook.com/heliontech> >> >> <https://facebook.com/heliontech> >> >> <https://facebook.com/heliontech> >> >> >> >> >> *From: cisco-voip <[email protected]> On Behalf Of >> Anthony Holloway Sent: Friday, August 10, 2018 12:13 PM To: Cisco VoIP >> Group <[email protected]> Subject: [cisco-voip] 8865 + KEM + Video >> Calls <https://facebook.com/heliontech>* >> >> <https://facebook.com/heliontech> >> >> I have a use case on an 8865 with the KEM, and a Line configured per the >> usual setup. If that line is on the phone itself, I can call it, and get >> video to establish. If I move the line to the KEM, I can call it, but get >> audio only. <https://facebook.com/heliontech> >> >> <https://facebook.com/heliontech> >> >> Is that working as designed, a configuration miss on my part, or a defect? >> <https://facebook.com/heliontech> >> >> <https://facebook.com/heliontech> >> >> Unfortunately, I don't have access to many expansion modules (none >> actually), so testing different setups/firmware versions is not possible. >> <https://facebook.com/heliontech> >> >> <https://facebook.com/heliontech> >> >> Thanks in advanced. <https://facebook.com/heliontech> >> >> >> _______________________________________________ >> cisco-voip mailing >> [email protected]https://puck.nether.net/mailman/listinfo/cisco-voip >> >> _______________________________________________ >> cisco-voip mailing list >> [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-voip >> >
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
