I have a remote 3640 running IOS (tm) 3600 Software (C3640-DS-M), Version
11.2(12)P, RELEASE SOFTWARE (fc1).
whenever I look at the config or reload a new config I get the following
message at the beginning of the config;
%Clock rate is ignored on DTE interfaces.
Looking at the router interfaces I find:
interface Serial3/2
description Not in Service
no ip address
shutdown
no snmp trap link-status
clockrate 2015232
!
interface Serial3/3
description Not in Service.
no ip address
shutdown
no snmp trap link-status
clockrate 2015232
I have issued the command "no clockrate" on each interface only to see a
message:
XXXXXXXX(config)#int s3/2
XXXXXXXX(config-if)#no clockrate
%Setting clockrate to default value 2015232.
XXXXXXXX(config)#int s3/3
XXXXXXXX(config-if)#no clockrate
%Setting clockrate to default value 2015232.
This is the only 3640 out of many remote sites that is giving me this
message. It also happens to be the only one with any interfaces that even
show a clockrate. I've checked CCO with the message and nothing comes back
that is helpful. Is there a reason for this I am missing, or I am missing
something in the config to stop this. Thx for any help.
--
James Haynes
Network Architect
Cendant IT
A+,MCSE,CCNA,CCDA,CCNP,CCDP
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=1875&t=1875
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
