After a quick look it appears that your BRI0 interface (and dialer0?)
should be set as ip nat outside, not inside.
Neil Schneider
""dt"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi,
> I am pretty new so please be patient. I am wearing my flame retardant
suit.
>
> I am trying to configure my ISDN BR. I am running a Cisco 804. Everything
> connects just fine. I can ping the inside interface on the router, the
> outside interface (dialer) which get an IP address from my ISP. I can ping
> the interfaces of my nodes on the LAN. I authenticate to the ISP Radius
> server. From the router everything seems to resolve just fine but from my
> inside network ( I run NAT) I can only ping the router interfaces. I can
> not ping anything beyond my outside interface.
>
> I know I must be missing something basic but I just can't figure it out.
Any
> help will be greatly appreciated.
>
> Thanks
>
> Dave T
>
> Here is my sh run from the router.
>
> Current configuration:
> !
> version 12.0
> no service pad
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname backbone_r1
> !
> enable secret 5 xxxxx
> enable password xxxx
> !
> dial-peer voice 1 pots
> no call-waiting
> ring 0
> port 1
> destination-pattern xxxxxx
> !
> pots country US
> ip subnet-zero
> !
> ip domain-name uswest.net
> ip name-server 206.196.128.1
> isdn switch-type basic-ni
> !
> !
> !
> interface Ethernet0
> ip address 172.16.0.2 255.255.0.0
> no ip directed-broadcast
> ip nat inside
> !
> interface BRI0
> ip address negotiated
> no ip directed-broadcast
> ip nat inside
> encapsulation ppp
> bandwidth 64
> dialer rotary-group 0
> dialer-group 1
> isdn switch-type basic-ni
> isdn spid1 xxxxxxxxxxxx1111
> isdn spid2 xxxxxxxxxxxx1111
> isdn incoming-voice modem
> !
> interface Dialer0
> ip address negotiated
> no ip directed-broadcast
> ip nat inside
> ip rip send version 1
> ip rip receive version 1
> encapsulation ppp
> bandwidth 64
> keepalive 32767
> dialer in-band
> dialer idle-timeout 300
> dialer string 3032541488
> dialer string 3032541186
> dialer hold-queue 10
> dialer load-threshold 10 outbound
> dialer-group 1
> ppp authentication pap callin
> ppp pap sent-username xxx password xxx
> ppp multilink
> !
> router rip
>
> router rip
> network 10.0.0.0
> network 172.16.0.0
> network 192.168.0.0
> !
> ip nat inside source list 1 interface BRI0 overload
> ip classless
> ip route 0.0.0.0 0.0.0.0 Dialer0
> !
> dialer-list 1 protocol ip permit
> dialer-list 1 protocol clns permit
> dialer-list 1 protocol netbios permit
> !
> line con 0
> transport input none
> stopbits 1
> line vty 0 4
> password
> login
> !
> end
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12375&t=12365
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
