This happened to me once and turning off fast switching on the BRI interface
made it work. command is 'no ip route-cache'. I am not sure if that will
solve your problem but give it a shot.
I also notice that you are routing for network 10.0.0.0 and 192.168.0.0 but
do not see any interfaces in those networks. You can probably remove those
from the config.
On your dialer-list, unless you want the line to stay up all the time, you
may want to narrow your definition of interesting traffic.
HTH-Dennis
""dt"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi,
> I am pretty new so please be patient. I am wearing my flame retardant
suit.
>
> I am trying to configure my ISDN BR. I am running a Cisco 804. Everything
> connects just fine. I can ping the inside interface on the router, the
> outside interface (dialer) which get an IP address from my ISP. I can ping
> the interfaces of my nodes on the LAN. I authenticate to the ISP Radius
> server. From the router everything seems to resolve just fine but from my
> inside network ( I run NAT) I can only ping the router interfaces. I can
> not ping anything beyond my outside interface.
>
> I know I must be missing something basic but I just can't figure it out.
Any
> help will be greatly appreciated.
>
> Thanks
>
> Dave T
>
> Here is my sh run from the router.
>
> Current configuration:
> !
> version 12.0
> no service pad
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname backbone_r1
> !
> enable secret 5 xxxxx
> enable password xxxx
> !
> dial-peer voice 1 pots
> no call-waiting
> ring 0
> port 1
> destination-pattern xxxxxx
> !
> pots country US
> ip subnet-zero
> !
> ip domain-name uswest.net
> ip name-server 206.196.128.1
> isdn switch-type basic-ni
> !
> !
> !
> interface Ethernet0
> ip address 172.16.0.2 255.255.0.0
> no ip directed-broadcast
> ip nat inside
> !
> interface BRI0
> ip address negotiated
> no ip directed-broadcast
> ip nat inside
> encapsulation ppp
> bandwidth 64
> dialer rotary-group 0
> dialer-group 1
> isdn switch-type basic-ni
> isdn spid1 xxxxxxxxxxxx1111
> isdn spid2 xxxxxxxxxxxx1111
> isdn incoming-voice modem
> !
> interface Dialer0
> ip address negotiated
> no ip directed-broadcast
> ip nat inside
> ip rip send version 1
> ip rip receive version 1
> encapsulation ppp
> bandwidth 64
> keepalive 32767
> dialer in-band
> dialer idle-timeout 300
> dialer string 3032541488
> dialer string 3032541186
> dialer hold-queue 10
> dialer load-threshold 10 outbound
> dialer-group 1
> ppp authentication pap callin
> ppp pap sent-username xxx password xxx
> ppp multilink
> !
> router rip
>
> router rip
> network 10.0.0.0
> network 172.16.0.0
> network 192.168.0.0
> !
> ip nat inside source list 1 interface BRI0 overload
> ip classless
> ip route 0.0.0.0 0.0.0.0 Dialer0
> !
> dialer-list 1 protocol ip permit
> dialer-list 1 protocol clns permit
> dialer-list 1 protocol netbios permit
> !
> line con 0
> transport input none
> stopbits 1
> line vty 0 4
> password
> login
> !
> end
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12381&t=12365
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
