This should fix it.
Interface bri 0
no ip nat inside
interface dialer 0
no ip nat inside
ip nat outside
exit
access-list 1 permit 10.0.0.0 0.255.255.255
access-list 1 permit 172.16.0.0 0.15.255.255
access-list 1 permit 192.168.0.0 0.0.255.255
no ip nat inside source list 1 interface BRI0 overload
ip nat inside source list 1 interface Dialer 0 overload
ctrl-z
Additionally, unless they've said otherwise, you don't need to exchange RIP
updates with your ISP. You can remove the RIP stuff from the
-----Original Message-----
From: dt [mailto:[EMAIL PROTECTED]]
Sent: Saturday, July 14, 2001 4:54 PM
To: [EMAIL PROTECTED]
Subject: ISDN Help [7:12365]
Hi,
I am pretty new so please be patient. I am wearing my flame retardant suit.
I am trying to configure my ISDN BR. I am running a Cisco 804. Everything
connects just fine. I can ping the inside interface on the router, the
outside interface (dialer) which get an IP address from my ISP. I can ping
the interfaces of my nodes on the LAN. I authenticate to the ISP Radius
server. From the router everything seems to resolve just fine but from my
inside network ( I run NAT) I can only ping the router interfaces. I can
not ping anything beyond my outside interface.
I know I must be missing something basic but I just can't figure it out. Any
help will be greatly appreciated.
Thanks
Dave T
Here is my sh run from the router.
Current configuration:
!
version 12.0
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname backbone_r1
!
enable secret 5 xxxxx
enable password xxxx
!
dial-peer voice 1 pots
no call-waiting
ring 0
port 1
destination-pattern xxxxxx
!
pots country US
ip subnet-zero
!
ip domain-name uswest.net
ip name-server 206.196.128.1
isdn switch-type basic-ni
!
!
!
interface Ethernet0
ip address 172.16.0.2 255.255.0.0
no ip directed-broadcast
ip nat inside
!
interface BRI0
ip address negotiated
no ip directed-broadcast
ip nat inside
encapsulation ppp
bandwidth 64
dialer rotary-group 0
dialer-group 1
isdn switch-type basic-ni
isdn spid1 xxxxxxxxxxxx1111
isdn spid2 xxxxxxxxxxxx1111
isdn incoming-voice modem
!
interface Dialer0
ip address negotiated
no ip directed-broadcast
ip nat inside
ip rip send version 1
ip rip receive version 1
encapsulation ppp
bandwidth 64
keepalive 32767
dialer in-band
dialer idle-timeout 300
dialer string 3032541488
dialer string 3032541186
dialer hold-queue 10
dialer load-threshold 10 outbound
dialer-group 1
ppp authentication pap callin
ppp pap sent-username xxx password xxx
ppp multilink
!
router rip
router rip
network 10.0.0.0
network 172.16.0.0
network 192.168.0.0
!
ip nat inside source list 1 interface BRI0 overload
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer0
!
dialer-list 1 protocol ip permit
dialer-list 1 protocol clns permit
dialer-list 1 protocol netbios permit
!
line con 0
transport input none
stopbits 1
line vty 0 4
password
login
!
end
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12485&t=12365
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
