ME thinks Russ wants to bridge and route the same protocol in which
case that won't work. Check IRB, integrated routing and bridging. I
have used IRB to bridge IP/IPX from one interface to another in the same
router but never in the scenerio you describe.
Dave
Jim Brown wrote:
>
> int e0
> ip address X.X.X.X Y.Y.Y.Y
>
> int e1
> bridge-group 1
>
> int s0
> ip address X.X.X.X Y.Y.Y.Y
>
> int s1
> bridge-group 1
>
> bridge 1 protocol ieee (or dec)
>
> -----Original Message-----
> From: Russ Kreigh [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, September 11, 2001 2:24 PM
> To: [EMAIL PROTECTED]
> Subject: Routing and Bridging [7:19472]
>
> Hello all -
>
> I need to bridge E1 to S1 on a router, and route E0 to S0, how can I do
> this? This router config is the same on each end.
>
> END A END B
>
> E0-S0 -- S0-E0
> E1-S1 -- S1-E1 (Bridge)
>
> Thanks
>
> -Russ
--
David Madland
Sr. Network Engineer
CCIE# 2016
Qwest Communications Int. Inc.
[EMAIL PROTECTED]
612-664-3367
"Emotion should reflect reason not guide it"
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=19487&t=19472
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
