Hello all -
I need to bridge E1 to S1 on a router, and route E0 to S0, how can I do
this? This router config is the same on each end.
END A END B
E0-S0 -- S0-E0
E1-S1 -- S1-E1 (Bridge)
====
END-A E0 - 192.168.1.1 END-B E0 - 192.168.2.1
END-A E1 - Bridge END-B E1 - Bridge
Notes: - All Serial's are "unnumbered"
The computers attaches to the E1 segments are 10.0.0.0/24, END-B's computers
will use 10.0.0.254 as a gateway; which is located at END-A.
Thanks
-Russ
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=19495&t=19472
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
