My client has a configuration as shown below running over a 56K circuit for
IP traffic and some terminal access to a mainframe not yet upgraded for
TN3270.
HTH
D.
At 05:46 PM 9/11/2001 -0400, MADMAN wrote:
>ME thinks Russ wants to bridge and route the same protocol in which
>case that won't work. Check IRB, integrated routing and bridging. I
>have used IRB to bridge IP/IPX from one interface to another in the same
>router but never in the scenerio you describe.
>
> Dave
>
>Jim Brown wrote:
>>
>> int e0
>> ip address X.X.X.X Y.Y.Y.Y
>>
>> int e1
>> bridge-group 1
>>
>> int s0
>> ip address X.X.X.X Y.Y.Y.Y
>>
>> int s1
>> bridge-group 1
>>
>> bridge 1 protocol ieee (or dec)
>>
>> -----Original Message-----
>> From: Russ Kreigh [mailto:[EMAIL PROTECTED]]
>> Sent: Tuesday, September 11, 2001 2:24 PM
>> To: [EMAIL PROTECTED]
>> Subject: Routing and Bridging [7:19472]
>>
>> Hello all -
>>
>> I need to bridge E1 to S1 on a router, and route E0 to S0, how can I do
>> this? This router config is the same on each end.
>>
>> END A END B
>>
>> E0-S0 -- S0-E0
>> E1-S1 -- S1-E1 (Bridge)
>>
>> Thanks
>>
>> -Russ
>--
>David Madland
>Sr. Network Engineer
>CCIE# 2016
>Qwest Communications Int. Inc.
>[EMAIL PROTECTED]
>612-664-3367
>
>"Emotion should reflect reason not guide it"
x$:0`0:$x,,,,x$:0`0:$x,,,,x$:0`0:$x,,,,x$:0`0:$x$:0`0:$x,,,,x$:0`0:$x,,,,x
Darren S. Crawford
Network Systems Consultant
Lucent Technologies - Sacramento
email: [EMAIL PROTECTED]
page via email: [EMAIL PROTECTED]
pager: 800-467-1467
"You always have time for things you put first" - Tucker Resources
x$:0`0:$x,,,,x$:0`0:$x,,,,x$:0`0:$x,,,,x$:0`0:$x$:0`0:$x,,,,x$:0`0:$x,,,,x
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=19496&t=19472
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
