Hi Matt, So it is correct to have the sprout_hostname=sprout.lannion.local, public_hostname=sprout1.lannion.local, for sprout1 for example, these two variables are not the same, so what is the difference between sprout_hostname and public_hostanme
And for the DNS conf, in th elast mail you told me I have to put sprout IN A 10.0.4.x1**** sprout IN A 10.0.4.x2 "Assuming your DNS server uses the standard zone file format, you write this as follows. ** ** sprout IN A 10.0.4.x**** sprout IN A 10.0.4.y " But in this mail, you told me "You also need to add per-node entries, as follows.**** ** ** sprout1 IN A 10.0.4.x1**** sprout2 IN A 10.0.4.x2**** sprout3 IN A 10.0.4.x3 " I am a bit confused, To remind you, I have one DNS on my architecture, that resolves all the hostnames Thanks 2013/8/8 Matt Williams <[email protected]> > Nour,**** > > ** ** > > Your config almost looks correct. You also need to add per-node entries, > as follows.**** > > ** ** > > sprout1 IN A 10.0.4.x1**** > > sprout2 IN A 10.0.4.x2**** > > sprout3 IN A 10.0.4.x3**** > > ** ** > > Matt**** > > ** ** > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *nour > nakouzi > *Sent:* 08 August 2013 12:26 > *To:* [email protected] > *Subject:* Re: [Clearwater] Load Balancing**** > > ** ** > > Hi Matt, **** > > ** ** > > So, a small summary:**** > > 1. I will have three sprout nodes in this case**** > > 2. The conf file of each one is:**** > > ################################sprout1############################"**** > > # Deployment definitions**** > > home_domain="lannion.local"**** > > sprout_hostname=sprout.lannion.local**** > > hs_hostname=hs.lannion.local:8888**** > > xdms_hostname=homer.lannion.local:7888**** > > ** ** > > # Local IP configuration**** > > local_ip=10.0.4.x1**** > > public_ip=172.25.241.x1**** > > public_hostname=sprout1.lannion.local**** > > ** ** > > ################################sprout2############################"**** > > # Deployment definitions**** > > home_domain="lannion.local"**** > > sprout_hostname=sprout.lannion.local**** > > hs_hostname=hs.lannion.local:8888**** > > xdms_hostname=homer.lannion.local:7888**** > > ** ** > > # Local IP configuration**** > > local_ip=10.0.4.x2**** > > public_ip=172.25.241.x2**** > > public_hostname=sprout2.lannion.local**** > > ** ** > > ################################sprout3############################"**** > > # Deployment definitions**** > > home_domain="lannion.local"**** > > sprout_hostname=sprout.lannion.local**** > > hs_hostname=hs.lannion.local:8888**** > > xdms_hostname=homer.lannion.local:7888**** > > ** ** > > # Local IP configuration**** > > local_ip=10.0.4.x3**** > > public_ip=172.25.241.x3**** > > public_hostname=sprout3.lannion.local**** > > ** ** > > 3. Next Step is to configure my DNS to route to the sprout:**** > > sprout IN A 10.0.4.x1**** > > sprout IN A 10.0.4.x2**** > > ** ** > > or **** > > sprout IN A 10.0.4.x3**** > > ** ** > > If the conf is OK, then i go to the next step testing the cluster**** > > _______________________________________________ > Clearwater mailing list > [email protected] > http://lists.projectclearwater.org/listinfo/clearwater > > -- **** ** * * *NAKKOUZI Nour * *Jeune diplômé e**n Télécom et Réseaux * *ISEN-Brest* *Website: www.nour-nakkouzi.fr* *Tél. : +33 (0)6.95.15.46.35* * * * * *S'il vous plaît prenez en considération l'environnement et ne pas imprimer cet e-mail, sauf si vou**s avez vraiment besoin.*
_______________________________________________ Clearwater mailing list [email protected] http://lists.projectclearwater.org/listinfo/clearwater
