I have a Lenovo ThinkStation. We turn on the Intel RAID and make the two disks a RAID1. We install XP Pro. The RAID is a SW RAID since Clonezilla and see two separate devices.
If I take a new ThinkStation, create the RAID1 device, then try to load the image I made, it shows the drives with "NONAME" and cannot load the image. I am sorry I don't have a screenshot or exact error code but it is related to the partition table. I have to use the "dd to create parition table" option to get the process started. I have also used the options '-t1' and '-k1' but the image will not boot. I have loaded the image three times and nothing appears during boot. I know I've done this one, where it worked, but I don't recall what was needed. When I create the image, I use the default settings (-q) and lzo compression. Thanks in advance for the help. Steve ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Clonezilla-live mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/clonezilla-live
